Banner Engineering surface flush mount E-stop range

Banner Engineering has expanded its line of emergency stop buttons with the surface flush mount E-Stop. The 40 mm emergency stop buttons are designed to mount on a wall or other flat surface without disassembling or individual wiring. They are available with a non-illuminated base with four actuator styles: standard, illuminated actuator, lockable actuator and an illuminated lockable actuator; or with an illuminated base with a standard or a lockable actuator.

The illuminated-base e-stops feature Banner’s EZ-Light logic and are available with two colours (yellow or green and red lighting) or one colour (red lighting). Depending on the model, the highly visible LED illuminated-base changes from yellow to flashing red when actuated.

The lockable-style actuator can provide supervisory or personal control. It is intended to prevent unauthorised or accidental resetting by accommodating a padlock to secure the actuated button in place.

Multiple e-stops can be connected via the CSS Series hookup cordsets for system-wide control. By applying an external signal via the M12 QD connector, the illuminated-base models can change from a steady yellow light to a steady red indicator light when a stop condition exists. Models that interface with SafetyBUS nodes and gateways are also available.

The e-stop buttons have a safe break action to ensure the safety contacts will open if the contact block is separated from the actuator. The push-to-stop, twist-to-release or pull-to-release actuator and direct (positive) opening operation is compliant with ANSI B11.19, ANSI NFPA79, ISO 13850 and IEC/EN 60204-1 Emergency Stop requirements.