The Larzep synchronised lifting system has been designed to operate up to 32 hydraulic actuators or cylinders from one pump.
The system uses either ultrasonic measurement (up to 300 mm stroke cylinders) or wire trace feedback to a PLC and LCD. The system allows a single operator to operate cylinders in a number of configurations to perform lifting, pushing, pulling or lowering of loads uniformly.
The sensors mounted on the cylinders feed back information to the PLC unit and automatically adjust the flow rate from the pump to ensure an even stroke rate from each cylinder. It also makes it easier to the centre of gravity due to the pressure control in each point.
The system can be used with cylinders working up to 700 bar working pressure with varying strokes and tonnages.
Some of the advantages of the system include: the system will evenly lift, lower, push or pull offset loads; it can be programmed to allow variable jacking point heights; the system can lift, push, pull or lower to a predetermined height or distance; and it is equipped for remote operation.
Phone: 03 9796 3744
Festo VTEP proportional valve terminal
The VTEP proportional valve terminal uses high-precision piezo valves to reduce compressed air...
Kaeser CSG.1 oil-free rotary screw compressors
The CSG.1 rotary screw compressors have air flow rates ranging from 4 to 15 m³/min and...
ELGi Air~Alert compressor monitoring solution
Air~Alert is a data transmission and analysis service that monitors critical parameters and sends...
