Flexicon low-profile screw conveyor

Wednesday, 27 June, 2018 | Supplied by: Flexicon Corporation (Aust) Pty Ltd



Flexicon has released a low-profile flexible screw conveyor with an integral bin and castor-mounted frame that can roll below mezzanines and other low-headroom areas, receive material from overhead equipment, and discharge the material into process equipment and vessels throughout the plant.

Ready to plug in and run, the self-contained unit features a push-type drive system positioned at the lower intake end of the conveyor, as opposed to a standard pull-type drive positioned at the upper discharge end of the conveyor. This is said to reduce overall height by approximately 610 mm.

At 250 L, the integral bin accommodates the contents of approximately one-third of a bulk bag measuring 1 x 1 x 1 m, or several typical 25 kg bags, depending on bulk density. A specialised BEV-CON screw within the straight conveyor tube is engineered to move a range of difficult-to-convey bulk materials that tend to cake, pack, smear or plug, as well as fragile products prone to breakage, with no separation of blends.

With the exception of the polymer tube, all material contact surfaces are stainless steel finished to food, pharmaceutical, dairy or industrial standards for rapid washdown and corrosion resistance.

Online: www.flexicon.com.au
Phone: 07 3879 4180
Related Products

Konica-Minolta AIRe Lens AR smart glasses

The AIRe Lens smart glasses device is designed to enhance training and knowledge sharing in...

Flexicon high-lift bin tipper

An open-chute high-lift bin tipper from Flexicon hydraulically raises and dumps mobile bins into...

Hygenius food-grade conveyor

Hygenius is food-grade conveyor that has been designed to reduce flat surfaces, cracks and...


  • All content Copyright © 2019 Westwick-Farrow Pty Ltd