Interface WMCP miniature load cells

Wednesday, 06 April, 2011 | Supplied by: AMS Instrumentation & Calibration Pty Ltd

The WMCP miniature load cell series from Interface adds overload protection to the family of environmentally sealed, stainless steel housed, proprietary temperature-compensated strain gauges. Load cell sizes are small for convenient mounting and machine integration.

WMCP load cells are available in capacities of 250, 500 and 1000 gf in both tension and compression. These load cells can be overloaded by 32 times the rated load without damage to the sensor and are protected by a dependable mechanical stop not previously available in the WMC miniature family. This protection greatly reduces the risk of signal error or damage from unpredictable, excessive load forces.

The Interface WMC load cell family of miniature force sensors also offers a slim design, an environmentally sealed stainless steel housing and a wide capacity range. WMC model capacities start at 250 gf with a 2 mV/V output in a small 19.05 mm diameter housing. The largest WMC rod end load cells offer capacities up to 890 kN in a slim 113.54 mm diameter housing.

The WMC load cell family includes optional male or female threaded mounting for flexible design, replacement or retrofit application requirements. The environmentally sealed, stainless steel housing is compatible with extreme environments found in the oil and gas industry and other industrial applications exposed to corrosive materials.

Phone: 03 9017 8225
Related Products

ABB LST200 ultrasonic level transmitter

The LST200 is designed specifically for industries with large installed bases of level...

Krohne OPTITEMP TRA-H6x and TRA-C6x temperature sensors

The OPTITEMP TRA-H6x/-C6x temperature sensors are designed for hygienic applications in the food...

WIKA FLM-CA and FLM-CM magnetostrictive level transmitters

With floats as small as 18 mm in diameter, the FLM-CA and FLM-CM magnetostrictive level...

  • All content Copyright © 2020 Westwick-Farrow Pty Ltd