Phoenix Contact Mini Analog isolation amplifier series

Click2Contact

The Phoenix Contact Mini Analog isolation amplifier series has been expanded with new modules.

The sensors, two new temperature transducers for resistance thermometers and thermocouples, meet all relevant international standards. A DIP switch allows users to quickly set the two transducers and the modules can be easily configured for extended functions and monitoring via the robust S-Port interface using a free software tool.

A new frequency transducer transforms speed pulses from below 1 Hz up to 80 kHz into an analog signal. The module supports NAMUR sensors as well as NPN and PNP outputs. The transducer is quickly configured via a DIP switch and with the intuitive ‘Teach-In Wheel’ for freely setting measuring ranges.

In addition, a new fault monitoring module provides transparent error logging for multichannel applications with up to 80 modules that are connected via the rail-mounted connector. If an error is detected internally or in the signal input of a transducer, it is reported via the rail-mounted connector. The fault monitoring module then displays the error via an NC contact, eliminating the need for a complicated individual evaluation. If the system is further equipped with the new feed terminal, it can detect and report power supply failures.