Advantech IDS-3110 10.4″ SVGA industrial LED open frame monitor

Tuesday, 14 August, 2012 | Supplied by: Advantech Australia Pty Ltd

Advantech IDS-3110 10.4″ SVGA industrial LED open frame monitor

The IDS-3110 is a 10.4″ SVGA industrial LED open frame monitor. The open front bezel design enables flexible and customised face plates for easy re-engineering and is suitable for any embedded application. The versatile mounting methods include rear and VESA mounting (75 x 75 mm or 100 x100 mm). The IDS-3110 comes in two versions: IDS-3110 standard and IDS-3110E. IDS-3110 standard provides 400 nits brightness and -20 to 60°C wide operating temperature with dual VGA and DVI signal interfaces. IDS-3110E is a more economic version which supports 230 nits brightness and 0 to 45°C operating temperature with VGA signal interface only.

The IDS-3110 incorporates a simple 2-piece metal frame structure for a slim design 30 mm thick (non-touch solution) while most models are over 40 mm thick. This is a space saving of 20% and a weight reduction from 2 kg to 1 kg for non-touch solutions.

Compared to traditional CCFL backlights, LED backlights allow for thinner panel designs and low power consumption. The IDS-3110 comes with an industrial-grade panel and LED backlight which saves 20-30% on power consumption and reaches higher brightness. The 400 nits brightness and 700:1 contrast ratio together brings much better visibility than common monitors, particularly in environments with strong ambient light. The wide viewing angle of 160° horizontal and 140° vertical provides a wider range viewing area for end users. In addition, IDS-3110’s wide range operating temperature of -20 to 60° C makes it suitable for harsh environments.

Online: www.advantech.net.au
Phone: 1300 308 531
Related Products

Phoenix Contact Trio Power power supply

The third-generation Phoenix Contact Trio Power power supply is now available with a protective...

Phoenix Contact PTCB 48 VDC circuit breakers

The PTCB single-channel circuit breakers can now protect loads with a supply voltage of 48 VDC.

NORD Drivesystems single-phase IE2 motors

The more efficient single-phase asynchronous motor now corresponds to efficiency class IE2.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd