Fluke 9141-NATA dry block temperature calibrator

Tuesday, 05 November, 2013 | Supplied by: TechRentals

Fluke 9141-NATA dry block temperature calibrator

Dry block calibrators have many benefits over the traditional method of liquid baths, including quicker heating and cooling times, smaller, lighter, portable and much wider operating temperature ranges.

The Fluke 9141-NATA dry block temperature calibrator has been designed with ease of use and functionality in mind. Weighing 3.6 kg, this unit is easily portable and is suitable for high-volume calibrations, making it easy and productive to use. The device is available to rent.

The upright unit calibrates up to 650°C, heats up to maximum temperature in only 12 min and has a 124 mm wide dry well. The heating and cooling rate is adjustable from the front panel, with connection to a PC via the built-in RS232 port also available. Thermal switches can be checked for actuation testing and multiple hole inserts are available for a variety of probe sizes. It features an accuracy to ±0.5°C, and has a stabilisation time of 7 min.

The included software allows the user to adjust set points and ramp rates, log dry well readings to a file, create an electronic strip chart and perform thermal switch testing with data collection.

Online: www.techrentals.com.au
Phone: 1300 767 071
Related Products

Phoenix Contact Trio Power power supply

The third-generation Phoenix Contact Trio Power power supply is now available with a protective...

Phoenix Contact PTCB 48 VDC circuit breakers

The PTCB single-channel circuit breakers can now protect loads with a supply voltage of 48 VDC.

NORD Drivesystems single-phase IE2 motors

The more efficient single-phase asynchronous motor now corresponds to efficiency class IE2.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd