HART air/gas flowmeter
21 September, 2009 | Supplied by: AMS Instrumentation & Calibration Pty Ltd
The FlexMasster ST98 flowmeter series from Fluid Components International is now compatible with the HART communication protocol for use in large-scale process and plant automation systems.
Wireless discrete transmitter
31 August, 2009 | Supplied by: Emerson
Emerson Process Management has released wireless float switch solutions that combine its Mobrey float switches with the Rosemount 702 wireless discrete transmitter.
Vibrating fork limit switches
31 August, 2009 | Supplied by: SICK Pty Ltd
The LFV and the LBV vibrating fork limit switches utilise piezoelectric measurement technology and exploit the damping properties of liquids and powdered bulk materials. The electronics of the LFV evaluate frequency changes while, in the case of the LBV, the rise or fall in amplitude determines whether a switching signal is transmitted.
Wind speed and direction transducers
25 August, 2009 | Supplied by: Amalgamated Instrument Co
A wide range of wind monitoring transducers by Mierij Meteo is now available. The range includes models suitable for most applications where wind speed and direction need to be monitored.
Chlorine-resistant pH and ORP electrodes
25 August, 2009 | Supplied by: Amalgamated Instrument Co
Amalgamated Instrument Co has released pH and ORP electrodes with replaceable cartridges and a chlorine-resistant PVC housing.
pH and ORP electrodes
14 August, 2009 | Supplied by: Amalgamated Instrument Co
Amalgamated Instrument Co has released its pH and ORP (redox) electrodes with replaceable cartridges with a chlorine-resistant PVC housing.
Optical oxygen sensor
30 July, 2009 | Supplied by: Mettler-Toledo Ltd
The InPro6970i from Mettler Toledo is designed for brewery applications. The optical oxygen sensors are easy and fast to maintain, leading to enhanced process safety and low cost of ownership.
Heavy-duty capacitance level switches
30 July, 2009 | Supplied by: Endress+Hauser Australia Pty Ltd
Endress+Hauser have launched Solicap S, a range of extreme-duty, capacitive switches for point level measurement of bulk solids. The range has been designed for the detection of both fine-grained and coarse solids in heavy-duty applications.
Field displays for day or night
30 July, 2009 | Supplied by: Endress+Hauser Australia Pty Ltd
Endress+Hauser has launched a range of highly visible, loop-powered field displays that are designed to be readable in any ambient light conditions, from direct sunlight to total darkness.
RHP humidity and temperature transmitter
30 July, 2009 | Supplied by: Dwyer Instruments (Aust) Pty Ltd
The series RHP humidity/temperature transmitter combines the voltage or current humidity transmitter output with a passive temperature thermistor or RTD output.
6918/6998 universal load cells
30 July, 2009 | Supplied by: Bestech Australia Pty Ltd
The 6918/6998 universal load cells, from BCM Sensors, are manufactured based on advanced metal foil strain gauge technology. They are made from either alloy steel (6918), with a nickel-plated treatment or stainless steel (6998).
Capacitance point level sensor
30 July, 2009 | Supplied by: Bestech Australia Pty Ltd
The Model CG capacitance point level sensor, from Nohken, provides reliable, simple and cost-effective point level detection of liquids, solids and adhesive conductive media.
New EDDL is guiding radar: interface level made easy
24 July, 2009 by Jonas Berge* | Supplied by: Emerson
Guided wave radar (GWR) level transmitters are ideal for challenging level and interface measurements on liquids, slurries and solids. A new breakthrough technology called electronic device description language (EDDL) integrates GWR level transmitters with intelligent device management software in a way not previously possible.
Data logger
20 July, 2009 | Supplied by: http://www.techrentals.com.au
The DT80 is able to be used across a wide range of applications. It is easily connected to most sensors and data measurement sources by analog and digital channels, high speed counter input, phase encoder inputs and programmable serial sensor channels.
Radio unit
20 July, 2009 | Supplied by: http://www.bintech.com.au
Bintech is proud to announce the release of the Pulsar IMP with Radio (R-IMP), designed to be a very cost-effective level monitoring/radio solution.
