FiberSensing FS 6500 single-axis fibre Bragg grating accelerometer
05 October, 2011 | Supplied by: Bestech Australia Pty Ltd
The FS 6500 single-axis fibre Bragg grating (FBG) accelerometer from FiberSensing is a fibre-optic version of the conventional accelerometer. Completely passive, with an intrinsically safe design, it offers inherent insensitivity to environmental-induced noise. The device is suitable for applications requiring the measurement of low frequency and small amplitude accelerations.
ICP Electronics I-87017ZW, 10/20-channel analog input module
29 September, 2011 | Supplied by: ICP Electronics Australia Pty Ltd
ICP Electronics has released the I-87017ZW, an analog input module that includes 10 differential or 20 single-ended analog input channels. It provides a programmable input range on all analog inputs.
Yokogawa YTMX580 multi-input temperature transmitter
28 September, 2011 | Supplied by: Yokogawa Australia Pty Ltd
The YTMX580 multi-input temperature transmitter is based on the ISA100.11a industrial automation wireless communication standard and features eight analog input channels.
Deltaflux orifice flowmeter
24 September, 2011 | Supplied by: Duff & Macintosh
The Deltaflux orifice flowmeter is designed for measuring gas and liquid flows and suitable for high flow rate measurement and control in process flows, water treatment and gas furnace applications.
Influx FloTrak metal VA flowmeter
23 September, 2011 | Supplied by: Duff & Macintosh
The Influx FloTrak metal VA flowmeter is designed for the measurement of gas and liquid. Fluid passing through an orifice within the tube causes a profiled float to assume a position where the forces created by flow are balanced by the weight of the float. A magnet in the float is sensed by the FloTrak system, providing a direct reading flow rate scale, optional alarms or a 4-20 mA output.
GE UNIK 5000 pressure-sensing platform
21 September, 2011 | Supplied by: GE Energy
The UNIK 5000 pressure-sensing platform from the Sensing business of GE Measurement & Control Solutions now carries FM and FMc approvals in addition to its existing IECEx/ATEX intrinsically safe certifications. As a result, UNIK 5000 pressure sensors can now be used worldwide in hazardous zone applications in the oil and gas and process industries, as well as in mining.
dataTaker DT80 Expansion Module
20 September, 2011 | Supplied by: TechRentals
Available to rent, the dataTaker DT80 Expansion Module connects 20 universal data logging channels to the dataTaker data logger, expanding the total channel capacity and input allowance. Dual isolation technology allows each channel to be used for two isolated inputs or three common reference inputs.
Utilising advanced pressure diagnostics to enhance process insight
15 September, 2011 | Supplied by: Emerson Automation Solutions
Advanced diagnostics embedded in a pressure transmitter can proactively detect abnormal process conditions.
Balluff BPS Series pressure sensors
14 September, 2011 | Supplied by: Balluff Pty Ltd
The BPS series of pressure sensors from Balluff have IP 67 protection for use in gaseous and liquid media. The rugged devices feature a high-quality, long-term stable ceramic load cell, simple installation and high precision. A large, bright and easily visible display shows status - the current system pressure in bar, mbar, psi and MPa - and also features fast and simple configuration of the sensors according to the VDMA standard, using two keys and intuitive menu guidance.
Dwyer Series GWL guided wave radar transmitter for liquids
14 September, 2011 | Supplied by: Dwyer Instruments (Aust) Pty Ltd
The Series GWL guided wave radar transmitter for liquids is a level transmitter providing an analog and switching output (4-20 mA as well as a NC SPST switch output) to provide continuous level indication of liquids.
Dwyer Series GWB guided wave radar transmitter for solids
13 September, 2011 | Supplied by: Dwyer Instruments (Aust) Pty Ltd
The Series GWB guided wave radar transmitter for solids is a level transmitter providing an analog and switching output (4-20 mA as well as a NC SPST switch output) to provide continuous level indication of powder bulk material.
Zeck Z9000 Natural Gas Odorisation System
07 September, 2011 | Supplied by: Duff & Macintosh
The Zeck Z9000 Natural Gas Odorisation System is centred around the task of odorising natural gas, simply and accurately, for low-volume applications.
Bedia capacitive level sensors
02 September, 2011 | Supplied by: Duff & Macintosh
Bedia’s capacitive level sensors are designed to be practically maintenance free and have a wide operating temperature range. They respond to the change of capacitance occurring when an electrode surrounded by air is immersed into the medium to be monitored. The various versions can be used as MIN/MAX sensors with closed circuit principle.
Optimising wastewater treatment
27 August, 2011 by Endress+Hauser Australia Pty Ltd | Supplied by: Endress+Hauser Australia Pty Ltd
Optimising the wastewater treatment process using analytical sensors with automated cleaning is a cost-effective way to reduce maintenance, improve efficiency and ensure measurement accuracy.
Gas analyser helps calm furnaces
23 August, 2011 | Supplied by: Siemens Ltd
Extremely high furnace temperatures and increasing water leakage are the main causes of the eruptions in electric submerged arc furnaces. Using a gas analyser to detect small water leaks has helped improve safety at TEMCO's Tasmanian manganese ferroalloy plant.
