Raytek MI3 miniature infrared temperature transmitter system
20 December, 2010 | Supplied by: ECEFast
The latest version of the Raytek MI3 miniature infrared temperature transmitter now has display and programming buttons accessible from the outside, and alternative versions for connection of between four and eight heads to one base unit.
Honeywell FlexLine level gauges
17 December, 2010 | Supplied by: Honeywell Process Solutions
Honeywell has announced that its FlexLine level gauges have been approved by the TÜV for use in SIL2-rated loops, allowing industrial facilities to use the devices in applications that require the stringent certification to prevent safety incidents. The gauges are used in overfill protection loops to prevent spillage and mitigate the likelihood of a catastrophic accident, effectively stopping overfill before it happens.
Graphtec GL820 midi logger
17 December, 2010 | Supplied by: Lontek
The GL820 midi logger from Graphtec features 20 analog input channels as standard and can be expanded up to 200 channels.
Emerson Raptor tank gauging system
17 December, 2010 | Supplied by: Emerson Automation Solutions
The Raptor tank gauging system from Emerson Process Management is based on open technology and is fully scalable. As a result, it is easy to install exactly the devices needed today as well as adding or replacing units tomorrow.
JUMO Midas S05 pressure transmitter
17 December, 2010 | Supplied by: OneTemp Pty Ltd
The Jumo Midas S05 pressure transmitter is a completely welded measuring system made of high-quality stainless steel and can be used in almost all substances, even under rough conditions.
Asahi Keiki A6000 series universal-type digital panel meter
24 November, 2010 | Supplied by: Bestech Australia Pty Ltd
The A6000 series universal-type digital panel meter from Asahi Keiki features a four-digit 20 mm red or green LED main display, and four-digit 6 mm red LED sub displays. It allows for fast and accurate readings of a selection of inputs, displaying them in the form required by the user. AC and DC voltage/current, resistance, thermocouple, frequency, strain gauge and process inputs can all be measured to high accuracy in an assortment of ranges.
Dwyer Instruments Mercoid Series 3100 pressure transmitter
23 November, 2010 | Supplied by: Dwyer Instruments (Aust) Pty Ltd
The Mercoid Series 3100 smart pressure transmitter is a microprocessor-based, high-performance transmitter with flexible pressure calibration, push-button configuration, and is programmable using HART communication.
Mercoid Series 3100 pressure transmitter
22 November, 2010 | Supplied by: Dwyer Instruments (Aust) Pty Ltd
The Mercoid Series 3100 smart pressure transmitter is a microprocessor-based, high-performance transmitter with flexible pressure calibration, push-button configuration, and is programmable using HART communication.
Ohmart/VEGA FiberTrac 31 nuclear detector
16 November, 2010 | Supplied by: VEGA Australia Pty Ltd
The Ohmart/VEGA FiberTrac 31 is a nuclear detector with a flexible scintillator, designed to be used for level measurement. It is suitable for a wide variety of liquids, bulk solids, sludge and suspensions, due to its ability to accommodate vessel geometry.
Applied Infrared Sensing temperature monitoring systems
29 October, 2010 | Supplied by: Applied Infrared Sensing
Temperature monitoring is an essential component of any process control system for the detection of potential fires in refuse or coal piles, and for monitoring at petrochemical plants or any manufacturing companies producing plastic injection-moulded products. Applied Infrared Sensing temperature monitoring systems use either infrared cameras (based on reflectivity of product in infrared spectrum) or thermal imaging cameras (for temperature control), utilising products from NEC Avio of Japan and Raptor Photonics of Ireland.
weber Sensors mini vent-captor type 3505/3022.30 airflow meter
29 October, 2010 | Supplied by: Automated Control Pty Ltd
The weber Sensors mini vent-captor type 3505/3022.30 is a remote airflow meter for industrial applications, suitable for small pipe sizes from ID 10 to 15 mm.
Graphtec midi LOGGER GL220
18 October, 2010 | Supplied by: Lontek
The Graphtec midi logger GL220 has ten isolated channels with multifunction inputs. The isolated input system ensures that signals are not interfered with by sensors connected to other channels. It can be used to capture voltage, temperature, humidity and pulse as well as logic signals.
Siemens Sitrans FST020 clamp-on ultrasonic flowmeter
14 October, 2010 | Supplied by: Siemens Ltd
The Sitrans FST020 clamp-on ultrasonic flowmeter is designed specifically for basic applications that only require flow reading functionality along with easy communication capabilities. The device measures almost any liquid and meets the specific requirements of industries such as water and wastewater, HVAC, power and chemical. The flowmeter can be installed on pipes up to DN 9000 (9000 mm) in size and, because of the simplified configuration options and set-up, can be quickly commissioned.
Bestech thermoMETER CT M3 infrared temperature sensor
11 October, 2010 | Supplied by: Bestech Australia Pty Ltd
The thermoMETER CT M3 is an infrared temperature sensor that provides accurate temperature measurements for metals, secondary metal processing and ceramic materials. It has a temperature range of 50 to 600°C and the unit can be used in ambient temperatures of 85°C without cooling.
SEW-Eurodrive DUV30A vibration analysis sensor.
17 September, 2010 | Supplied by: SEW-Eurodrive Pty Ltd
SEW-Eurodrive has launched its updated vibration analysis sensor, the DUV30A. Replacing the company’s DUV10A sensor, the DUV30A features faster sampling time at a constant speed, allowing the monitoring of more dynamic gear-unit applications.
