Turck BL67 ethernet gateway for Ethernet/IP and Modbus TCP/IP
24 September, 2012Designed to provide a reliable communication solution for on-machine, modular I/O applications, the BL67 is suitable for use in environments where conditions may not be conducive to traditional I/O.
Moxa NPort W2150A/W2250A series RS232/422/485 to wireless IEEE 802.11a/b/g device servers
09 August, 2012The NPort W2150A/W2250A series allows secure data access with WEP/WPA/WPA2/802.1x encryption, consumes only 2.4 W of power and supports wide-temperature operation.
Secomea LinkManager Mobile
16 July, 2012LinkManager Mobile can run on an iPhone, iPad or Android smartphones and tablets.
Moore Industries Bullet WirelessHART adapter
06 July, 2012Moore Industries and MACTek Corporation have worked together to jointly supply the Bullet WirelessHART adapter.
Siemens Scalance X-200RNA redundant network access point
06 June, 2012Siemens has expanded its range of industrial network products with a fault-tolerant system solution for smooth and delay-free redundancy in industrial ethernet networks.
Phoenix Contact Radioline wireless I/O system
20 May, 2012The Radioline wireless system from Phoenix Contact distributes signals via wireless from up to 250 stations without any software.
Allen-Bradley PowerFlex 750-Series Profibus DPV1 module
14 April, 2012The PowerFlex 750-Series Profibus DPV1 module enables users to integrate the Allen-Bradley PowerFlex 750-Series AC drives with Profibus networks through a standard D89 connector.
Phoenix Contact SHDSL high-speed modems for ethernet and Profibus
05 April, 2012Phoenix Contacts’s SHDSL high-speed modems for ethernet and Profibus have two DSL ports to quickly and simply commission point-to-point connections, link redundancy, as well as line and star topologies.
Secomea SiteManager secure remote access solution
16 February, 2012Providing more than a VPN or RDP, the Secomea secure remote access solution creates a transparent yet highly secure channel over the internet or mobile network between the client terminal and the destination network or host.
Balluff distributed modular I/O system
02 February, 2012 byBalluff’s new generation of distributed modular I/O can be used in a cost-effective way to replace standard slice I/O and distributed I/O solutions. Offering IP67 protection and industry-standard connectors, many types of control data can be collected. Using standard 3-conductor cables, up to four slave devices can be connected to each master block, which communicates over the industrial ethernet network to the controller.
Quatech AirborneAP APXG-Q5420 wireless device server
30 December, 2011 byThe Quatech AirborneAP APXG-Q5420 enables M2M equipment to become the centre of a self-sufficient Wi-Fi network. The server allows easy access to serial data and network resources from Wi-Fi enabled devices, including laptops, tablets and handhelds powered by Android, iOS, or Windows.
Westermo Lynx DSS serial-to-ethernet switches
14 November, 2011 byLynx DSS is an industrial ethernet switch for managing applications with a combination of IP and serial connections. Providing a single unit solution, the Lynx DSS replaces the need for multiple units. Powered by an updated version of the Westermo WeOS operating system, it provides serial-to-ethernet connectivity and support for dual serial networks, modem replacement functionality, and Modbus gateways. Legacy devices can be connected via two serial ports (RS-232 and RS-232/RS-422/485).
ProSoft ProLinx EtherNet/IP to IEC 60870-5-104 Client gateway
08 October, 2011 byThe ProLinx EtherNet/IP to IEC 60870-5-104 client gateway is designed to provide a fast and flexible solution for enabling an EtherNet/IP network to monitor and control data from up to four remote IEC 60870-5-104 servers.
Schneider Electric Modicon Quantum Ethernet I/O (QEIO) solution
30 September, 2011 byThe Modicon Quantum Ethernet I/O (QEIO) solution is designed to offer a flexible architectural design needed to safely optimise network processes, and supports both remote I/O and distributed I/O.
Beckhoff EP5101 EtherCAT Box incremental encoder interface
15 September, 2011 byThe EP5101 EtherCAT Box is an interface for the direct connection of incremental encoders with differential inputs (RS485). Due to the optional interpolating microincrements functionality, the EP5101 can supply more precise axis positions for dynamic axes. It supports the synchronous reading of the encoder value together with other input data in the EtherCAT system via high-precision EtherCAT distributed clocks.
