Industrial networks & buses > Interfaces, gateways & device servers

RS485 data acquisition: a new chapter

02 October, 2013 by Steve Huang and Wayne Chen, Moxa Inc

RS485 and ethernet are two commonly adopted communication interfaces used in data acquisition and control systems. Ethernet I/O devices are generally considered more sophisticated, RS485 I/O devices may be sufficient for budget-conscious system integrators. Nonetheless, there are still ways device manufacturers can improve on the lasting legacy of RS485 data acquisition devices.


Artila Electronics RIO-2010 web-based remote I/O control module

26 August, 2013

The Artila Electronics RIO-2010 web-based remote I/O control module is designed for simple, stable performance, and supports Modbus protocols.


Turck BL20 Modbus I/O gateway

26 July, 2013

Turck has expanded its BL20 I/O system with a gateway for serial Modbus communication, supporting both Modbus RTU as well as the ASCII protocol over RS485 and RS232.


Hirschmann EAGLE Tofino OPC Enforcer OPC firewall module

24 July, 2013

Protection of traffic using OPC Classic protocol is almost impossible with traditional firewall rule sets, so the OPC Enforcer takes a different approach, dynamically opening only the TCP ports required for each allowed connection.


Secomea 3G Secure Remote Access system starter pack

24 July, 2013

The Secomea remote access system starter pack includes everything necessary to provide a remote connection to a PLC, HMI or any programmable device, and is typically operational in 15 minutes.


Phoenix Contact Axioline F series I/O system

28 June, 2013

The Axioline F family of I/O products, designed for installation in control cabinets, is being expanded further with additional I/O components and function modules, and the devices can now be operated on additional key networks. Devices for connecting to EtherCAT and Modbus/TCP (UDP) networks now supplement the bus couplers for Profinet and Sercos 3. An additional bus coupler also enables connection to the Profibus fieldbus system.


Acromag BusWorks XT Series multichannel optocoupler and interposing relay modules

31 May, 2013

The BusWorks XT Series multichannel discrete contact sensor and relay output modules offer a safe, isolated interface between high-energy field devices and sensitive control system I/O modules.


Lantronix xDirect serial-to-ethernet device server

08 March, 2013

The Lantronix xDirect device server is a compact serial-to-ethernet device server that provides quick and easy connectivity to virtually any device or machine with a serial interface.


LevelOne IED-4020 industrial ethernet serial device server

04 March, 2013

The IED-4020 is an industrial ethernet serial device server that can be used to remotely configure, monitor and manage the operation of PLCs, process controls, power monitoring equipment, barcode scanners and other factory floor serial devices.


Secomea SiteManager models 1439 and 3439 remote access solutions

05 February, 2013

Secomea has expanded the range of 3G SiteManager units to include models 1439 and 3439 with four LAN ethernet ports.


Westermo Wolverine DDW-142 SHDSL ethernet network extender

21 November, 2012

The Wolverine DDW-142 allows effective ethernet networks to be created over long distances (up to 15 km) at data rates up to 15.3 Mbps on a single twisted pair cable.


Moxa MGate 5101-PBM-MN Profibus/Modbus TCP gateway

07 November, 2012

The MGate 5101-PBM-MN gateway provides a communication portal between Profibus devices (such as Profibus drives or instruments) and Modbus TCP hosts.


Moxa PTC-101-M12 series ethernet-to-fibre media converters

01 November, 2012

The PTC-101-M12 series meets critical EMC, shock, vibration and environmental requirements in compliance with the EN 50121-4 standard.


Turck FGEN Advanced I/O Module (AIM) station for industrial ethernet

29 October, 2012

The FGEN features Turck’s multiprotocol technology, which was developed to simplify industrial ethernet for distributed I/O.


Advantech ADAM-2000Z series wireless I/O modules

26 October, 2012

The Advantech ADAM-2000Z series I/O modules use the IEEE 802.15.4 standard I/O and latest sensor technology while supporting 2.4 GHz mesh networking.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd