Fluid Components International FS10i ventilation air flow switch

Saturday, 01 September, 2018 | Supplied by: AMS Instrumentation & Calibration Pty Ltd

Fci fs10i flow switch hi 1

The dual function FS10i flow switch/monitor from Fluid Components International (FCI) is particularly useful in air flow safety-related applications such as industrial ovens and furnaces because of its low flow detection and repeatability, with no-moving-parts reliability.

The FS10i provides both a relay output for low flow trip point detection and a continuous 4–20 mA flow monitoring output. It operates over a wide flow range from 0.076 to 122 MPS. Repeatability is ±0.5% of reading, and it is designed for simple insertion into 13 mm or larger diameter venting pipes and square ducts.

The FS10i is fast responding and highly repeatable with both increasing and decreasing changes in flow rate, and is designed for long life with no routine maintenance in rugged industrial plant environments. It operates in measured air temperatures up to 121°C and at pressures up to 138 bar. The electronics are contained in a stainless steel body and protected aluminium end cap which carries IP65/66/67 protection ratings.

The FS10i has obtained agency approvals that include: FM and FMc for nonincendive, Class I, Division 2, Groups A, B, C, D; Class II, Division 2 Groups E, F, G; Class III, T4@Ta=71°C; ATEX, IECeX nonincendive for gas and dust, Zone 2; EAC (TRCU) Russia, II 3 G Ex nA IIC T4 Gc, II 3 D Ex tc IIIC T81°C Dc, IP64.

Online: www.ams-ic.com.au
Phone: 03 9017 8225
Related Products

Vega VEGABAR 80 series pressure transmitters

Vega has released the VEGABAR 80 series of three pressure transmitters, with which it claims that...

Monnit ALTA wireless quad temperature sensor

The ALTA multi-probe industrial wireless temperature sensor features four independent sensor...

HAWK SENATOR radar level transmitter

The SENATOR radar level transmitter is available in both 24 and 80 GHz frequencies.

  • All content Copyright © 2019 Westwick-Farrow Pty Ltd