Conditioners & supplies

Article (1)
  • Prevent 24 VDC overloads from stopping production
    Along with the laws of physics, engineers have to be aware of the law of unintended consequences. Take, for example, something as simple as the 24 VDC power supplies that feed the control circuits in automation systems as a case in point.
Product (34)
  • FEAS SNT50 series switchmode power supplies
    The SNT50 series switchmode power supplies from FEAS are claimed to feature good radio shielding and high reliability integrated into a functional and stable casing.
  • FEAS SSE90 power supply with integrated buffer module
    The FEAS SSE90 power supply with integrated buffer module combines a compact switchmode power supply with a maintenance-free buffer module that uses high-capacity double-layer capacitors as storage elements.
  • FEAS Accupack LDR4012 and LDR4024 buffered power supplies
    FEAS Accupack LDR4012 and LDR4024 are made with charging regulators and serve to buffer 12 and 24 V systems. The Accupack LDR is designed to be connected between the line voltage and the installation in order to provide DC to the equipment. In the event of a mains power failure, the onboard sealed batteries supply the system, connected to the outlet. The supply duration depends on the load current of the consumer. The batteries can be easily replaced if necessary.
  • Metal Work Pneumatic Pneumo-Power pneumatic power supply
    Pneumo-Power is a product that incorporates an electric generator powered either by exhaust air (reduced environmental impact) or a compressed air supply to create 24 VDC locally where wiring may be costly or impractical to install.
  • Wago 857 Series Jumplex transducer and relay modules
    The Wago 857 Series Jumplex transducer and relay modules have a compact design, with 6.0 mm width, and can operate over a temperature range from -25 to 70°C.
  • Banner Engineering BWA-SOLAR-001 FlexPower solar supply
    Banner Engineering has released the FlexPower solar supply, BWA-SOLAR-001, specifically designed for powering SureCross wireless network devices.
  • Zener diode barriers
    Turck has introduced MZB series Zener diode barriers, designed to effectively limit excess energy before it reaches a hazardous area. The MZB barriers provide removable terminals within an efficient and space-saving design - with channels as small as 6.3 mm wide - to consume minimal panel space. Additionally, the MZB series features a bussed power feed and offers both relay and solid-state switch models.
  • DIN rail power supply
    The Mean Well SDR-120 is an AC/DC isolation Class I DIN rail power unit.
  • DIN rail power supplies
    The PBAMR Series 10-92W is a range of Class II output DIN rail switching power supplies suited to building automation, factory automation, semiconductor fabrication equipment, marine installation and electromechanical applications with medium to high power demand. The series is available in 7.5, 15, 22.5 and 35 W models.
  • Current loop isolators
    Omniflex has introduced three signal isolators in the Omniterm LZ series with integrated 10 kA 8/20 µs surge arrestors to cater for applications that require both loop isolation and surge protection. The LZ series combines both functions in under 12 mm per channel of DIN rail space.
  • Strain gauge signal conditioner
    Weidmüller’s ACT20P range of signal isolators now contains a strain gauge signal conditioner. The ACT20P-Bridge combines small size with state-of-the-art technology providing simple programming, non interacting calibration points plus front panel or external tare function.
  • Switchmode power supplies
    The PRO-M range of switchmode power supplies offers space saving of up to 50% and no ventilation gap is required between multiple units, so that the PRO-M will squeeze into tight switchboards or machines.
  • 40 A power supplies
    Siemens has added a compact 40 A basic unit to its Sitop modular power supply series. It is 150 mm wide, which is 90 mm narrower than the previous unit. The 20 A power supply has also been renewed and is now 70 mm wide. The two Sitop PSU300M standard mounting rail power supplies for connection to three-phase 400-500 VAC networks now have a wider range input (from 320 to 575 VAC) than previous versions and they provide a reliable 24 V supply even when there are large deviations in the mains supply. The user now simply evaluates the ‘DC 24 V OK’ operating mode via an integrated dry signalling contact.
  • Transmitter trip-amplifier
    The Wave TTA Transmitter Trip-Amplifier is programmable to suit any common DC input type.
  • Power supplies
    Harting pCon 2000 series power supplies are designed for control cabinet installation.
  • Small footprint signal conditioners
    In the instrumentation world, panel space equals money. Moore Industries has addressed this requirement for narrow instruments with the miniMoore family of multi-channel analog signal conditioners. These signal conditioners deliver up to four low-cost I/O channels in a 25.4 mm footprint, which equates to 6.35 mm per channel.
  • Programmable universal signal conditioners
    The Red Lion DIN rail mounted signal conditioners provide complete isolation and conversion capability to satisfy most applications. The universal input can accept RTD, TC, Ohm, Potentiometer, mA, VDC and Process signals.
  • Analog interface modules
    Turck has introduced the IMS interface module, designed to provide a cost-effective solution for analog signal conversion. The IMS interface module measures 6.2 mm wide, featuring one of the smallest profiles on the market today.
  • DIN rail power supply
    MeanWell has launched a slim switching power supply, the MDR-10 series, for low-wattage DIN rail (TS-35/7.5 or 15) applications. Available in 5, 12, 15 and 24 V and up to 2 A, the 10 W Class I models are enclosed within a slim 22.5 mm isolated plastic case and feature a universal AC input and include short-circuit, overload and overvoltage protection.
  • DIN rail power supply
    Meanwell Enterprises has launched the first model in its slim DIN rail product series, the SDR-240, for the growing demand of high-performance DIN rail power supplies. The slim design of 63.5 mm in width helps save precious space on the rail and makes it 42.8% smaller in size in comparison to the previous model.
  • Universal signal conditioner
    The loop-powered eLINE LPI signal conditioner works with most standard signal types, in one unit without jumpers (milliamps, millivolts, volts, thermocouple, RTD and resistance).
  • DIN rail power supplies
    With global certifications, compact size and an impressive operating temperature range, the PSG series of 24 VDC power supplies fits a wide variety of applications.
  • DIN rail power supply
    MeanWell has launched a slim switching power supply, the MDR-10 series, for low-wattage DIN rail (TS-35/7.5 or 15) applications.
  • 33 W sixteenth brick series
    The KW006-010TM series of sixteenth brick isolated power modules is a new generation of single output DC-DC power converters. Designed for optimum efficiency and power density, this DC-DC converter series joins the 50 W KW010/015/020/025 products as a suitable choice for small space, high current and low-voltage applications in enterprise equipment, data processing equipment, access, wireless and optical network equipment, and distributed and hybrid power architectures.
  • Intrinsically safe barriers
    Turck IM Series Isolating Intrinsically Safe Barriers from Micromax now have IEC Ex International approvals.
  • DIN rail power supply
    ADM Instrument Engineering has introduced the Meanwell DR100 100 W power supply. A DIN rail-mount power supply, that will fit into a fuse box type enclosure, with Class II insulation level (double insulated, no earth wire is required), the DR-100 series provides a plastic case that is free from hazardous leakage current and is up to 89% efficient.It has an input voltage range of 88-264 VAC and 124-370 VDC. The output voltages are 12, 15 and 24 VDC at 100 W. To compensate for wiring voltage drops, the output voltage can be adjusted from the front panel, and the coloured LED indicator also gives an immediate visual conformation of the DC output status.
  • Switchmode power supplies
    The Ecoline DC switchmode power supply range has features such as a built-in remote status alarm, easily adjustable output voltage and up to 50% overload protection and auto-restart.
  • Harmonic filters
    The MTE MATRIX D series harmonic filters provide high-performance filters that are not only significantly smaller in volumetric size but weigh less through magnetic circuit design which helps to reduce their cost.
  • Lower electricity consumption
    Goldway Energy has developed a retrofit product that refines, controls and modulates electricity to reduce costs for businesses of all types.
  • Signal isolator
    The ISCX3 is a signal isolator that accepts a 4-20 mA with an input impedance of 50W or 0-10 VDC with an input impedance of 20 kW and provides three isolated output channels of 4-20 mA or 0-10 VDC with an accuracy of 0.1%.
  • Diagnostic power conditioner
    TURCK's Diagnostic Power Conditioner system (DPC) for Foundation Fieldbus H1 features an integrated diagnostics module that provides the end user with statistics to ease the task of diagnosing problems associated with the Foundation Fieldbus physical layer. This information is used to assist in the commissioning and maintenance of a Foundation Fieldbus system.
  • Compact multi-purpose isolated DC-DC converters
    The new SU/SUC Series from Cosel is the world's smallest isolated DC-DC converter. This unit is dramatically reduced in size and weight compared with Cosel's 2U series with a higher efficiency and higher reliability.
  • Power supply
    The RSP-1000 is a 1000 W enclosed switching power supply with power factor correction and parallel function in the 1U low profile package.
  • Surge protection devices
    Weidmüller's PU I series of Class I surge protectors with varistor technology offers a discharge capacity of 12.5 kA (10/350 µs). The pluggable, self-monitoring surge voltage arresters are optionally available as 1-, 3-, or 4-pole versions and with optional remote signalling contacts.
News (2)
© 2010 Westwick-Farrow Pty Ltd. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this website constitutes acceptance of our Terms and Conditions and Privacy Policy.

Get your FREE membership today - CLICK HERE  |  Log-in