Safety sensors

Feature (2)
Product (18)
  • Pilz PSENsgate secure safety gate monitoring system
    The PSENsgate secure safety gate monitoring system is a combination of electronics and mechanics, combining safety gate monitoring, safe guard locking with escape/auxiliary release, E-Stop, request and acknowledgement button.
  • Sick C4000 Palletizer Advanced safety light curtain
    The C4000 Palletizer Advanced safety light curtain meets the demands of Performance Level ‘e’ according to EN ISO 13849 and SIL3 in line with IEC 61508. The C4000 Palletizer Advanced provides the possibility of human-material differentiation without supplementary muting components, and tolerance of object detection in a variety of detection situations, such as differing pallet loads, and strapping bands or foil projecting into the monitored field.
  • Safety light curtain
    The ReeR Janus M-Series safety light curtain is a multi-beam optoelectronic Type 4 safety system, complying with IEC61496-1,2 EN61496-1 for the protection of persons exposed to dangerous machinery or plant.
  • Safety light curtains
    The first and last beams of the Banner Engineering EZ-Screen Low Profile (LP) safety light screens are positioned at the ends of the light screen, delivering continuous detection along the entire light screen length and eliminating the dead zones found on traditional safety light curtains.
  • Confined space gas detector
    BW Technologies' Micro Clip confined space gas detector is intended to warn personnel working in confined spaces of the presence of the most commonly encountered hazardous gases and combustibles.
  • Safety light curtain
    With a 15 mm by 20 mm housing profile, the Allen-Bradley Guardmaster GuardShield Micro 400 light curtain is claimed to be the smallest Type 4 safety light curtain on the market.
  • Safety light curtain
    The miniTwin safety light curtain has been designed for tasks in which a machine's risk analysis demands the greatest possible level of protection - Performance Level pl e according to EN ISO 13849-1, or SIL3 in compliance with IEC 61508 or the sector standard EN 62061.
  • Personal gas detector
    The BW Technologies Micro Clip personal gas detector is intended to warn personnel working in confined spaces of the presence of the most commonly encountered hazardous gases and combustibles.
  • Outdoor IP camera with IR vision
    The EDS-143P is a 'bullet' type IP camera designed for use in outdoor locations. The device supports infra red night time vision, and has integrated Power over Ethernet 100Base-TX port for data and power.
  • Safety switch
    The Euchner CES-AP-C safety switch makes CES transponder technology available to protect even very small guards and doors.
  • Safety switch
    Due to its small design, the STM safety switch with its plastic housing is suitable for applications in which robustness is required in combination with small dimensions.
  • Bolt safety sensor system
    The BoltSafe Sensor CMS (continuous monitoring system) is a specially designed sensor to monitor the residual bolt load in bolted joints. In this way, the uncertainty in achieving the desired residual bolt load can be removed. This will result in enhanced safety, dependable joints, better control and improved cost benefit both during installation and throughout the joint’s service life.
  • Failsafe manual reset thermostats
    The KMF series of failsafe thermostats monitor temperatures in furnaces, ovens, kilns, boilers or any application where an overtemperature condition would result in a critical failure. These thermostats work on the principle of liquid expansion from a bulb into a capillary which actuates a microswitch contact.
  • Oxygen sensor
    ABB has announced that it has rounded off its product range of measuring technologies for the EasyLine series of continuous gas analysers with the addition of the zirconium dioxide sensor ZO23.
  • Laser safety sensor
    The Shrike series of laser sensors for long-folder guarding installations has been upgraded in model SH-L600.
  • Force transducer with thin film sensor
    According to European standard EN 280, every aerial working platform with a payload of more than 200 kg and a space of more than 1 m2 has to be equipped with an overload protection. The platform has to be switched off at 110% of the nominal load of the platform, with an accuracy of ±10%.
  • Safety relays
    With multi-output capabilities, the MSR142RTP and MSR144RTP relays are designed to meet a variety of safety application requirements, including those incorporating safety interlock switches, E-stops, light curtains and safety mats.
  • Gas detector
    Industrial Scientific Corporation's GasBadge Plus single gas detector has received a third-party certified ingress protection (IP) rating of 66/67 and a number of agency approvals. The IP rating of 66/67 indicates that the two-year, maintenance-free monitor was tested to be dust tight and resistant to water ingress from both water jets and immersion.
News (2)
  • Risk assessment service for machines
    Treotham Automation has launched a service providing risk assessments on any type of machine.
  • Machines receive gift of sight
    A futuristic ‘eye’ developed by Pilz and DaimlerChrysler claims to allow people to work next to robots and other automated machines without physical safety barriers.
© 2010 Westwick-Farrow Pty Ltd. All Rights Reserved. Designated trademarks and brands are the property of their respective owners. Use of this website constitutes acceptance of our Terms and Conditions and Privacy Policy.

Get your FREE membership today - CLICK HERE  |  Log-in