Moxa PT-508/510 series IEC 61850-3 substation switches
08 July, 2011 | Supplied by: CrispTech Pty Ltd
The Moxa DIN-Rail PT-508/510 series IEC 61850-3 substation switches offer a -40 to 85°C operating temperature range, and redundant features that tackle specific needs and requirements found in power substations.
Pepperl+Fuchs intrinsically safe transmitter power supplies
07 July, 2011 | Supplied by: Pepperl+Fuchs (Aust) Pty Ltd
Pepperl+Fuchs has released four transmitter power supplies for intrinsically safe applications up to SIL3. The transmitter power supplies for the K- and H-Systems have each been extended to include two additional modules that are designed for intrinsically safe applications up to SIL 3 according to EN61508. The advantage of these supplies is that only a single transmitter is required to construct an intrinsically safe signal circuit for SIL 3. Previously for SIL 3 this was only possible using two separate inputs, both of which had to be monitored for redundancy reasons. Internal diagnostic functions are also signalled via a single output and red LED, and prescribed test intervals can be extended for SIL 2 applications.
Quatech Airborne wireless ethernet bridges and routers
05 July, 2011 | Supplied by: Interworld Electronics and Computer Industries
Interworld has expanded its range of Quatech ethernet-to-Wi-Fi products.
GarrettCom Magnum 10ETS ethernet terminal server
02 July, 2011 | Supplied by: Madison Technologies
The GarrettCom Magnum 10ETS ethernet terminal server provides up to eight ethernet ports or up to 32 serial ports for protection, SCADA devices and IRIG-B time coding, and is suitable for large substation installations with large numbers of serial instruments.
MooreHawke Trunksafe Fault-Tolerant Fieldbus System
29 June, 2011 | Supplied by: http://www.miinet.com/moorehawke
The Trunksafe Fault-Tolerant Fieldbus System from MooreHawke protects against single points of failure.
Achieving next-generation connectivity
15 June, 2011 | Supplied by: Belden Australia Pty Ltd
Industrial ethernet impacts every aspect of the operation. Building a strong industrial ethernet system and harnessing the power of its wireless component can reap unanticipated benefits for the entire facility.
Westermo Lynx+ L110-F2G managed 10-port Layer 2 ethernet switch
04 June, 2011 | Supplied by: Madison Technologies
The Lynx+ L110-F2G is a managed 10-port Layer 2 ethernet switch from Westermo that is suitable for advanced Layer 2 switching in industrial applications with extreme operating conditions. It has eight fixed 10/100/BaseTX ports and two multi-rate SFP ports (100 Mb or 1000 Mb), enabling users to choose from a variety of transceivers.
Integrating a network of wireless sensors with standard control systems
02 June, 2011 | Supplied by: Zigsense
Wireless mesh networks are designed to provide high bandwidth communications channels between wireless sensing nodes over a specific coverage area.
Turck BL20 Economy gateways for EtherNet/IP and Modbus TCP
27 May, 2011 | Supplied by: Turck Australia Pty Ltd
Turck has released the BL20 Economy gateways for EtherNet/IP and Modbus TCP. Providing a flexible in-the-cabinet system for distributed I/O, these gateways can be paired with a broad range of I/O slices to suit users’ application communications and transparency requirements. RFID can also be incorporated in any distributed I/O product by applying the necessary RFID-S slices.
Moxa IKS-G6524 Series industrial rackmount ethernet switches
25 May, 2011 | Supplied by: CrispTech Pty Ltd
The IKS-G6524 Series of high port density, industrial-grade, rackmount ethernet switches support full gigabit capability for use as centralised switches in industrial networks. They feature 24 gigabit ports or up to 24 gigabit SFP fibre connections operating at 10/100/1000 Mbps. The switches are suitable for creating high-performance aggregated connectivity for networks that support bandwidth-hungry multimedia and video applications. The IKS-G6524 series also includes three copper/fibre combinations with SFP choices.
Han PushPull Model 14 angled RJ45 IP65/67 connector
17 May, 2011 | Supplied by: Harting (HK) Limited
The Han PushPull Model 14 connector is designed for Profinet cabling with protection category IP65/67 to IEC 61076-3-117. A robust metal housing with angled cable outlet upwards and downwards offers benefits for cabling in restricted environments.
Harting Ha-VIS FTS 3100-A, FTS 3082-ASFP and FTS 3060-A switches
17 May, 2011 | Supplied by: Harting (HK) Limited
Harting has announced three additions to its range of fast ethernet switches with Fast Track Switching technology: the Ha-VIS FTS 3100-A, equipped with 10 RJ45 ports; the Ha-VIS FTS 3082-ASFP, equipped with eight RJ45 ports plus two SFP slots; and the Ha-VIS FTS 3060-A prototype, with six RJ45 ports in a slim design.
Plant-wide optimisation
30 April, 2011 | Supplied by: Rockwell Automation Australia
Forward-thinking manufacturers constantly work to maximise asset utilisation, productivity and uptime - as well as integrate these with other aspects of the enterprise through plant-wide optimisation. The convergence of manufacturing and enterprise functions is more easily achieved using a common network technology. Gordon Bartlett discusses the implications.
Perle Systems Iolan DS serial ethernet converters
28 April, 2011 | Supplied by: Belden Australia Pty Ltd
Belden has announced the addition of four Perle Systems’ Iolan DS serial ethernet converters to the Hirschmann product line. The converters enable the connection of end devices to ethernet networks and are easy to configure through the Perle Device Manager software.
ICP DAS GW-7472 EtherNet/IP to Modbus RTU Master Gateway adapter
28 April, 2011 | Supplied by: ICP Electronics Australia Pty Ltd
The GW-7472 EtherNet/IP to Modbus RTU Master Gateway adapter from ICP DAS is designed for data-exchange between the Modbus RTU network and the EtherNet/IP network. It reads the register data from the Modbus RTU slaves and then publishes this data to the input register of the EtherNet/IP scanner and vice versa.
