Equipment

Beamex CENTRiCAL workshop calibration test bench

01 November, 2021 | Supplied by: AMS Instrumentation & Calibration Pty Ltd

The CENTRiCAL workshop calibration test bench is designed to combine ease of use, versatility and ergonomics for performing calibrations in a workshop.


Phoenix Contact QUINT DC/DC converters

27 October, 2021 | Supplied by: Phoenix Contact Pty Ltd

With their compact, slimline design, the DC/DC converters are designed to ensure more space is available in the control cabinet.


Phoenix Contact PTU 4 hybrid disconnect terminal blocks

20 October, 2021 | Supplied by: Phoenix Contact Pty Ltd

Hybrid terminal blocks from Phoenix Contact enable different connection technologies to be used for the interior and exterior sides of a control cabinet.


ABB introduces safer and more sustainable digital switchgear

15 October, 2021 | Supplied by: ABB Australia Pty Ltd

ABB has extended its IEC low-voltage switchgear range with technology that improves safety, improves energy efficiency and provides digital condition monitoring.


Sinamics S210 drive system with Simotics S-1FK2 servo motor

14 October, 2021 | Supplied by: Siemens Ltd

The single-cable servo drive system is food and beverage appropriate and can be used in a wide range of applications.


HYDAC water-glycol cooling circuits for hydropower plants

01 October, 2021 | Supplied by: HYDAC International

HYDAC's water-glycol cooling circuits (WGK) are designed specifically for hydropower plants with a capacity up to 30 MW.


HARTING connectors with PushPull technology

01 October, 2021 | Supplied by: Harting (HK) Limited

With PushPull locking, an audible click during the tool-free assembly process signals that a correct connection has been established.


Ralston ControlPak manual pressure controller

22 September, 2021 | Supplied by: Ralston Instruments LLC

The Ralston ControlPak is a manual pressure controller that includes everything needed for pressure calibration when using an external compressed gas source.


Bonfiglioli BX heavy duty IE3 motors

09 September, 2021 | Supplied by: Bonfiglioli Transmission Pty Ltd

Bonfiglioli's BX Heavy Duty Series of asynchronous motors is designed to meet the requirements of demanding industrial applications.


Critical seals and gaskets: asking the right questions

07 September, 2021 | Supplied by: CSGtech

Pumps and valves are technologies at the heart of many process and automation innovations that depend closely on the efficiency of optimum seals and gaskets.


ABB and Stäubli to collaborate on electric mine solutions

03 September, 2021 | Supplied by: ABB Australia Pty Ltd

ABB has signed a memorandum with Stäubli Electrical Connectors to develop solutions for the transition to all-electric mines.


LAPP UNITRONIC UV-resistant outdoor cables

01 September, 2021 | Supplied by: LAPP Australia Pty Ltd

When they are installed outdoors, cables should be UV-resistant.


igus igubal spherical ball bearings

01 September, 2021 | Supplied by: Treotham Automation Pty Ltd

The narrow, lubrication-free igubal spherical balls can be inserted into existing metallic pillow block and flange bearing housings within a few seconds.


Michell S8000–100 low dew-point hygrometer

01 September, 2021 | Supplied by: AMS Instrumentation & Calibration Pty Ltd

The Michell S8000–100 is a high-precision, low dew-point hygrometer designed to meet the demands of humidity calibration and standards laboratories.


WA company launches world’s first Ex-rated inspection robot

27 August, 2021

The spider-like Magneto-EX with its magnetic feet is the first system to be developed that is suitable for use in hazardous area inspections.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd