Equipment > Conditioners & supplies

Phoenix Contact Uno Power decoupling diode

20 August, 2014

The Phoenix Contact Uno Power diode decouples power supplies connected in parallel, thereby increasing operational reliability.


Emerson PM-30 power module for ROC800 and ROC800L RTU flow computers

13 August, 2014

The PM-30 offers increased power delivery and the flexibility to install the ROC800 in either 12 V solar installations or 24 V rackmounted installations without needing to change the module.


PULS UC10.241 and UC10.242 DC buffer modules

02 June, 2014

The UC10.241 and UC10.242 DC buffer modules extend the buffer times currently offered by the UF20.241 and UF20.481 by utilising electrochemical double-layer capacitors


PULS UB20.241 DIN rail UPS

30 April, 2014

The UB20.241 DIN rail UPS has been designed to back up critical 24 VDC loads such as PLCs, RTUs and HMIs in the event of a power failure.


Phoenix Contact Plugtrab PT-IQ Ex IS surge protection system

11 April, 2014

The Plugtrab PT-IQ Ex self-monitoring surge protection system is specifically designed for intrinsically safe applications and can be installed directly in Ex zone 2.


Schneider Electric RM35JA32MW control relay

25 March, 2014

The Schneider Electric RM35JA32MW control relay is designed to monitor for overcurrent or undercurrent, and provides adjustable time delays.


Phoenix Contact Quint AC UPS

21 March, 2014

The Quint AC UPS uninterruptible power supply with IQ technology is designed to achieve high system availability for loads with 120 or 230 VAC and 500 VA power.


Weidmüller DC-UPS 1.3 Ah battery

28 February, 2014

Weidmüller has added a 1.3 Ah battery to its range of DC-UPS batteries, which now provides backup power from minutes to hours for automation components.


Wieland Electric Wipos PB1 power supply series

23 January, 2014

The Wipos PB1 power supply series is designed for low installation heights and narrow installation spaces that are common for small distribution boards, shunting distributors and control cabinet applications.


Phoenix Contact EMD-BL compact monitoring relays

21 November, 2013

The EMD-BL compact monitoring relays monitor current, voltage and phase sequence.


FEAS SSE2410 buffer module for 24 VDC systems

13 November, 2013

The FEAS SSE2410 buffer module is designed to help ensure a reliable and uninterrupted power supply, even during heavy network fluctuations, such as power brownouts.


Moore Industries low-voltage power supplies for CPA, CPA, ECT and TMZ

24 October, 2013

Moore Industries has added low-voltage power supply options to many of its products, making them suitable for use in remote applications such as oil and natural gas wellheads where power supplies are limited.


Phoenix Contact CBB multichannel circuit-breaker boards

23 October, 2013

The CBB multichannel circuit-breaker boards accommodate up to five devices for each protection path and thus help to reduce the installation effort.


DEHN + SOHNE DEHNvenCI combined lightning current and surge arrester

30 September, 2013

The DEHNvenCI is a combined lightning current and surge arrester with a discharge capacity up to 25 kA and combines system protection and compact dimensions in a single device.


FEAS SNT15024-K switch mode power supply

05 September, 2013

The FEAS SNT15024-K switch mode power supply is designed to withstand inadvertent polarity reversal while also providing an output that is protected from short circuit conditions.


  • All content Copyright © 2024 Westwick-Farrow Pty Ltd