Products
(Displaying 86 of 86)
The advantages of Cambridge Viscosity sensors derive from the proprietary oscillating piston technology the company has developed.
(+)
Michell Instruments has released the XTP601 thermo-paramagnetic oxygen analyser to provide fast, accurate measurements of oxygen levels in various background gases.
(+)
The Ircon Modline 7 Series infrared thermometer is a rugged, IP65 (NEMA 4) sealed sensor system for continuous temperature monitoring and control requirements.
(+)
ST100 Series thermal mass flow meters from Fluid Components International (FCI) are available with FCI’s VeriCal in-situ calibration verification system and are suitable for flare gas applications aboard offshore platforms, land-based oil/gas fac...
(+)
The Model FS10A flow switch/monitor from Fluid Components International (FCI) has received ATEX and IECEx approvals, making it suitable for continuous flow verification applications supporting process analyser sampling systems operating in hazardous pl...
(+)
The Beamex MC6 is one device with five different operational modes, which means that it is fast and easy to use, and users don’t have to carry multiple pieces of equipment in the field.
(+)
Rotary piston technology has long been established as a simple but reliable metering principle providing high levels of accuracy and repeatability for a wide range of liquids - from extremely viscous lubricants, chemicals and food bases to non-conducti...
(+)
The Katronic KATflow clamp-on ultrasonic flowmeters work on the transit-time method. This is based on the principle that sound waves travelling with the flow will move faster than those travelling against it. The resulting difference in transit time is...
(+)
McCrometer’s V-Cone flow meter is claimed to be inherently more accurate than traditional DP instruments because of the flow conditioning function built into its sensor design. Its centrally located cone interacts with the fluid steam, reshaping ...
(+)
The Yamatake AT9000 Advanced Transmitter is a microprocessor-based smart transmitter that features high performance and stability. Capable of measuring gas, liquid, vapour and liquid levels, it transmits 4-20 mA analog and digital signals according to ...
(+)
Noshok 300 Series brass case gauges with the optional maximum indicating pointer can be used as a tool for performing system set-up and diagnostics, and identifying spikes in a system.
(+)
The Katronic KATflow 200, 230 and 150 ultrasonic clamp-on flowmeters are all equipped with the Audible Sensor Positioning Assistant, which makes correct sensor installation simple and quick. The assistant indicates the correct position of the sensors d...
(+)
The Yamatake advanced temperature transmitters, models ATT60 and ATT70, are field instruments that convert inputs from thermocouples, mVs and resistance thermo-bulbs into analog (4-20 mA) and digital signals and transmit them to receivers. Various para...
(+)
Noshok electronic indicating pressure and temperature transmitter/switches provide local monitoring, 4-20 mA current output and switching control.
(+)
The Noshok 1800 Series attachable loop-powered digital indicator provides convenient local indication and is easily inserted into a variety of Noshok transmitters, including 300 Series compact OEM pressure transmitters, 615/616 Series high-accuracy pre...
(+)
The Trimec TM Turbopulse mini and the larger TP Turbopulse turbine meter series measure flows of low viscosity liquids from 3 to 7,000,000 L/h in a range of sizes from 1/4 to 20″ (6~500 mm).
(+)
Noshok offers a variety of cost-effective orifices and snubbers to protect valuable instrumentation from pulsation and pressure spikes by restricting the flow of rapidly increasing and decreasing pressures.
(+)
The ST100 Series thermal mass flow meter from Fluid Components International (FCI) now provides a modular design so that the flow meter can be adapted as necessary with a plug-in card replacement that can be changed out by plant technicians in the fiel...
(+)
The Trimec Multipulse Oval series PD flowmeters offer a high level of accuracy, turndown and repeatability. These precision meters are used for flow-rate measurement in flow monitoring and control applications and for totalising in dispensing and batch...
(+)
Noshok’s 900 Series gauges are designed to work in industrial applications where pulsation, vibration and shock are present. They feature a durable 304 stainless steel case with polycarbonate lens, an integrated bezel for panel mounting in the 2&...
(+)
Beamex has available two different dry block series: the FB Series field temperature blocks and the MB Series metrology temperature blocks. The dry blocks in the FB Series are lightweight, high-accuracy temperature dry blocks for industrial use. The dr...
(+)
The WMCP miniature load cell series from Interface adds overload protection to the family of environmentally sealed, stainless steel housed, proprietary temperature-compensated strain gauges. Load cell sizes are small for convenient mounting and machin...
(+)
Noshok 100 and 150 Series mini valves are small in size and are available in zinc nickel-plated steel, electropolished stainless steel and 360 brass.
(+)
Fluid Components International (FCI) has released its VeriCal in-situ calibration verification system for gas and flare flowmeters. The VeriCal System is a device that allows technicians to confirm flow measurement accuracy in minutes, saving time and ...
(+)
The Noshok 640 series heavy-duty pressure transducers feature diffused semiconductor and sputtered thin-film technology to provide maximum stability. They are designed for industrial and laboratory applications requiring high accuracy and repeatability...
(+)
The Noshok 800 series test gauges meet the specification of ASME standard B40.1 Grade 3A, and are suitable for use in laboratories on calibration test stands, on aerospace equipment and in gauge-repair facilities. They are available in ranges from vacu...
(+)
Panametrics aluminium oxide moisture probes from GE Measurement & Control Solutions are coupled to Panametrics hygrometer consoles by an interconnecting cable.
(+)
The Ronan X96SI/R is an ethernet-capable radiometric transmitter, enabling configurations, software updates and data logging to be completed through the user’s PC using a standard web browser. The X96SI/R includes an optical coupling that allows ...
(+)
The Noshok 800 series platinum resistance temperature transmitter is designed for immediate, accurate temperature measurement in applications including water systems, storage tanks, industrial machinery and machine tools, HVAC systems and refrigeration...
(+)
Noshok valves are now available with zinc nickel (ZnNi) plating, achieving greatly improved resistance to corrosion in salt spray (fog) corrosion tests. All Noshok needle and manifold valves will now utilise this material as standard plating to withsta...
(+)
The Noshok 1000 Series of digital gauges now includes vacuum/compound ranges. Standard pressure ranges are available from 0 to 30 psig, to as high as 0 to 10,000 psig. Compound ranges are now also available from 30/30 psig through 30/600 psig.
(+)
Noshok has upgraded the 200 and 300 Series mechanical switches to provide increased versatility, along with improved repeatability and contact ratings.
(+)
The Noshok 1000 Series of digital gauges now includes vacuum/compound ranges. Standard pressure ranges are available from 0 to 30 psig, to as high as 0 to 10,000 psig. Compound ranges are now also available from 30/30 psig through 30/600 psig.
(+)
Trimec has released the RT20 flow rate totaliser in a robust metal housing. This instrument is compatible with most manufacturers’ flowmeters and comes with scaled pulse and high/low flow alarm outputs as standard.
(+)
Trimec has released the RT20 flow rate totaliser in a robust metal housing. This instrument is compatible with most manufacturers’ flowmeters and comes with scaled pulse and high/low flow alarm outputs as standard.
(+)
The PMC MTM 3000 miniature depth and level pressure sensor is available for applications where space is very limited. The housing diameter of 1 cm offers the user high performance level measurement in small diameter, such as in ½-inch monito...
(+)
The OEM series of level sensors from Fluid Components International (FCI) are designed to offer accuracy, fast response and long-term reliability for designers of industrial equipment for process control and manufacturing operations.
(+)
Noshok’s 2-valve block and bleed needle valves offer a 10,000 psi pressure rating (at 93°C maximum), and are 100% helium leak tested to 1 x 10-4 mL/s.
(+)
The RPU-353 is a special-purpose electronic temperature recorder designed to monitor the tunnel pasteurisation process. It has inputs for two temperature probes for monitoring spray water and product temperature together with package internal pressure.
(+)
The RPU-352 is a special-purpose electronic temperature recorder designed to monitor the tunnel pasteurisation process. It has inputs for two temperature probes so that the conditions inside and outside the package can be measured at the same time.
(+)
The MT91 multipoint gas mass flowmeter from Fluid Components International (FCI) has been tested by TÜV Rheinland Germany and found to comply to EN 15267-1: 2009, EN 15267-2: 2009, EN 15267-3: 2007 and EN 14181: 2004.
(+)
Process and plant engineers, who need to monitor fugitive emissions from compressors, pressure relief valves, pumps and other gas flowing components, will find a good solution in the FlexSwitch FLT93S Flow Switch from Fluid Components International (FC...
(+)
The Model FS10A flow switch/monitor from Fluid Components International (FCI) is a low-cost solution for continuously verifying flows within liquid or gas process analyser sampling systems. It is suitable for the continuous monitoring of analyser sampl...
(+)
The VIP (Vortab Insertion Panel) flow conditioner is designed to completely neutralise flow profile irregularities caused by elbows, valves, blowers, compressors and other flow disturbances that commonly occur in piping and duct runs and cause flowmete...
(+)
The Emco Controls’ Epsilon flowmeter with five holes combines a traditional single-hole orifice plate with a flow conditioner. This means that straight pipe runs upstream of the flowmeter can be reduced from 20 times inner pipe diameter to five t...
(+)
Orimas mass flowmeters from Emco Controls can be used to measure the mass flow of most liquids and gases within the process industries, including the chemical, petrochemical, pharmaceutical and power industries.
(+)
The General Eastern HygroPro is a loop-powered, intrinsically safe moisture transmitter for measuring the moisture content in gases and non-aqueous liquids in pipeline natural gas, petrochemical, power generation, pharmaceutical, process and industrial...
(+)
The DigitalFlow CTF878 clamp-on gas flowmeter from Panametrics utilises a technology called correlation tag to determine gas flow rate. This technique is very different from traditional ultrasonic transit-time measurement and is well suited for gas app...
(+)
With a stable switching point setting, the robust Noshok 400 Series mechanical pressure switch converts pneumatic and hydraulic pressure into switching functions, and is designed for applications requiring maximum accuracy under high loads.
(+)
The 180 Series OEM flow sensors from Fluid Components International (FCI) is a family of flow and level sensors that are claimed to offer high accuracy, fast response and long-term reliability using FCI’s thermal dispersion sensor technology to f...
(+)
Ircon has introduced the Modline 6 series of infrared thermometers. This line of sensors features advanced signal processing and background-reflected energy compensation capabilities and includes one- and two-colour fibre-optic IR devices designed for ...
(+)
Noshok’s sintered pressure snubbers are intended to provide a simple and cost-effective solution to protect expensive instrumentation.
(+)
The Sentinel ultrasonic flowmeter from Panametrics is designed to meet the high accuracy requirements of AGA9 for natural gas custody transfer, as well as NMI pattern approval.
(+)
The GF90 gas mass flow meter from Fluid Components International is designed for gas measurement applications, such as chlorinated water disinfection systems. As a solid state meter, the GF90 is designed to measure extremely low flow rates, and it is c...
(+)
The Beamex POC6 is an automatic pressure output controller, providing regulated output from vacuum to 70 bar (1015 psi). The POC6 can be used as a standalone pressure controller or integrated to the Beamex calibration system.
(+)
The FLT93S flow/level/temperature switch from Fluid Components International performs monitoring, controlling and alarming of flow rates or levels of critical fluids such as foams, emulsion layers, liquids and slurries. Its rugged industrial...
(+)
Noshok offers several 5-valve manifold options, designed for use with differential pressure transmitters. These manifolds employ two isolation valves, two equalising valves and a vent valve for use in natural gas applications.
(+)
Noshok’s 850 series electronic indicating temperature switch/transmitter utilises PT100 technology to provide continuous temperature monitoring, electronic temperature switching and 4-20 mA analog output while providing local digital indication.
(+)
The ST75 flow meter from Fluid Components International (FCI) is designed to deliver precise, direct mass flow measurement of gases in an easy to install insertion-style instrument that requires almost no maintenance over a long life.
(+)
Ircon has introduced an enhanced version of its Modline 5R infrared thermometer with advanced signal detection and attenuation alarming capabilities. The Modline 5 Series 5R ratio sensors are designed for non-contact, infrared temperature measurement a...
(+)
Noshok 3540 Series tension and compression force transducers are available in many sizes and shapes to fit almost any application, including cable or rod tension, weight measurement, overload protection, clamping force and fill level measurement.
(+)
The FlexMasster ST98 flowmeter series from Fluid Components International is now compatible with the HART communication protocol for use in large-scale process and plant automation systems.
(+)
Beamex has released version 2.5 of its CMX calibration software, which brings several improvements and additions in terms of functionality and features.
(+)
The FLT93 tank level switch from Fluid Components International is now rated for Safety Integrity Level (SIL) 2-compliant service. It has been classified as a Type A subsystem in accordance to IEC 61508-1 with a hardware failure tolerance of...
(+)
The GF90 flare gas flowmeter from Fluid Components International is designed to solve the problem of measuring dangerous, explosive and toxic gases that often flow at extremely varying or low levels. It can measure waste gases of varying hydrocarbon co...
(+)
The ST51 mass flow meter from Fluid Components International has a non-clogging thermal dispersion mass flow sensing element design that operates over a wide flow range with low-flow sensitivity. This rugged design is suitable for wet, dirty coal mines...
(+)
The Newport wiSeries meter-scanner-controller works with a large number of Newport wireless sensors for temperature measurement with thermocouples, RTDs and semiconductor sensors and for relative humidity and barometric pressure.
(+)
The Noshok 1000 series digital pressure gauge offers accurate digital pressure indication. The gauge features an integrated battery with up to 4000 h of battery life, eliminating the necessity of fixed power supplies.
(+)
The BoltSafe Sensor CMS (continuous monitoring system) is a specially designed sensor to monitor the residual bolt load in bolted joints. In this way, the uncertainty in achieving the desired residual bolt load can be removed. This will result in enhan...
(+)
The Noshok 1000 series digital pressure gauge features an integrated battery with up to 4000 h of battery life, eliminating the necessity of fixed power supplies.
(+)
Noshok’s 300 series compact-sized pressure transducer delivers long-term stability during operation and is suitable for use in general industrial applications where space is limited and durability is essential.
(+)
The ST75 flowmeter from Fluid Components International is now available in a remote mountable configuration for applications in hazardous areas or hard-to-reach locations. The ST75’s remote mount transmitter, which includes a full digital display...
(+)
Ircon has announced its Maxline 2 system with a camera link interface supporting multiple thermal imaging cameras for a variety of automated process control and inspection applications. The system’s software has a built-in input/output relay and ...
(+)
The Beamex MC4 is a compact-sized documenting process calibrator. Being a multifunction calibrator, the MC4 is suitable for calibrating various process parameters, such as pressure, temperature and electrical signals.
(+)
The AT9000 advanced transmitter from Yamatake is a microprocessor-based smart transmitter that features high performance and good stability. Capable of measuring gas, liquid, vapour and liquid levels, it transmits 4-20 mA DC analog and digital signals ...
(+)
The Noshok 800 Series indicating pressure switch/pressure transmitter provides continuous pressure monitoring and allows programming of the setpoints without pressurising.
(+)
FCI’s ST51 flowmeter is designed to measure digester gas, biogas and other methane-composition biofuel gases as well as natural gas. FCI precision calibrates all ST51 flowmeters in its NIST-traceable flow lab to match the gas composition of the u...
(+)
Flexim’s small black pads add to the long-term durability of clamp-on ultrasonic flowmeters.
(+)
The NuTec LS2000 level switch from Fluid Components International is designed for 2-wire, 4-20 mA loop power that allows the LS2000 to serve as a drop-in replacement for other 2-wire mechanical float and paddle switches without any wiring modifications...
(+)
The HNL Series 100 pneumatic switch is designed for use on monitoring systems associated with natural gas transmission. Typically, the switch can be used to protect a system or pipeline from an abnormally high or low pressure which might result in the ...
(+)
The NuTec LS2000 level switch from Fluid Components International is designed for 2-wire, 4-20 mA loop power that allows the LS2000 to serve as a drop-in replacement for other 2-wire mechanical float and paddle switches without any wiring modifications...
(+)
Flexim’s small black pads add to the long-term durability of clamp-on ultrasonic flowmeters.
(+)
The HNL Series 100 pneumatic switch is designed for use on monitoring systems associated with natural gas transmission.
(+)
Yamatake Corporation has added to its WaterMAG series of medium- and large-sized electromagnetic flowmeter detectors specifically designed for the water industry markets.
(+)
The Ronan continuous weighing system consists of a measuring frame, source holder, detector, cable and electronic unit. The measuring frame is available in ‘A’ and ‘O’ frame co...
(+)
The model CMU Coriolis mass flowmeter delivers more than twice the industry standard flow rate than previously available to set a new benchmark when compared to other Coriolis devices in its class. The flowmeter combines large line size service, high f...
(+)
