optek turbidity meters and colorimeters
04 March, 2015 | AMS Instrumentation & Calibration Pty LtdThe optek inline turbidity meters can be specified to measure turbidity, haze, clarity and optical density, while the optek colorimeters are suitable for many real-time measurements for improved process control.
optek turbidity meters and colorimeters
04 March, 2015 | AMS Instrumentation & Calibration Pty LtdThe optek inline turbidity meters can be specified to measure turbidity, haze, clarity and optical density, while the optek colorimeters are suitable for many real-time measurements for improved process control.
Michell I7000 Hygrosmart relative humidity and temperature sensor
06 February, 2015 | AMS Instrumentation & Calibration Pty LtdThe I7000 Hygrosmart relative humidity and temperature sensor provides highly reliable and accurate measurements of the key parameters for ensuring food is kept fresh and in good condition.
Michell Instruments MDM50 portable hygrometer
17 December, 2014 | AMS Instrumentation & Calibration Pty LtdThe MDM50 portable hygrometer gives rapid dewpoint measurements in compressed air and has been designed to make spot checks of dewpoint in air and gases as simple and fast as possible.
ATC Diversified Electronics SLA Series 3-phase monitoring relays
12 December, 2014 | AMS Instrumentation & Calibration Pty LtdThe SLA Series 3-phase monitoring relay from ATC Diversified Electronics offers cost-effective protection from phase loss, undervoltage, and phase reversal conditions that can contribute to premature equipment failure and downtime within motor control centres, critical motors and pumps.
ATC Diversified Electronics Model SPM 120AAA single-channel shaft seal monitoring module
10 December, 2014 | AMS Instrumentation & Calibration Pty LtdATC Diversified Electronics' Model SPM 120AAA provides early warning of possible motor shaft seal leakages and failures, and can help reduce the risks of premature equipment failure and downtime.
Michell Instruments humidity calibration support services
19 November, 2014 | AMS Instrumentation & Calibration Pty LtdMichell Instruments not only produces a comprehensive range of humidity calibration instruments and equipment, the company's network of application engineers offers support and training in this complex field.
Michell Instruments OptiPEAK TDL600 moisture analyser for natural gas
03 November, 2014 | AMS Instrumentation & Calibration Pty LtdThe OptiPEAK TDL600 is a moisture analyser for natural gas that offers a high accuracy with a lower detection limit of less than 1 ppmV.
optek CF60 conductivity sensor
31 October, 2014 | AMS Instrumentation & Calibration Pty LtdThe optek CF60 conductivity sensor features a 6-electrode, 4-pole design, which results in a reliable and precise measurement of a broad conductivity range from 1 µS/cm up to 850 mS/cm.
Katronic KATflow 100 ultrasonic flowmeter
29 October, 2014 | AMS Instrumentation & Calibration Pty LtdThe Katronic KATflow 100 is for permanent flow metering applications and has a reduced specification for applications where the features of the more advanced KATflow 150 and KATflow 170 are not required.
optek Control 4000 photometric converter
24 October, 2014 | AMS Instrumentation & Calibration Pty LtdThe optek Control 4000 is a microprocessor-based photometric converter that is designed for ultraviolet (UV), visible (VIS), near-infrared (NIR) absorption-based and scattered light-based sensors.
Michell Instruments XZR400BM oxygen analyser
09 October, 2014 | AMS Instrumentation & Calibration Pty LtdThe XZR400BM oxygen analyser is a small and light transportable instrument, capable of taking readings of both trace and percentage oxygen levels.
FCI ST50 flow meter
03 July, 2014 | AMS Instrumentation & Calibration Pty LtdHighly suitable for compressed air flow measurement, the ST50 features a wide flow range from 0.23 to 122 NMPS for air, compressed air or nitrogen, using thermal dispersion mass flow sensing technology.
Azbil multivariable vortex flow meters
07 May, 2014 | AMS Instrumentation & Calibration Pty LtdThe vortex multivariable flow meters from Azbil North America employ three sensing elements in a single meter: a vortex shedding velocity sensor, an RTD temperature sensor and a solid-state pressure transducer.
Michell DryCheck dew point instrument and sampling system
08 April, 2014 | AMS Instrumentation & Calibration Pty LtdThe DryCheck from Michell is an accurate and stable dew point instrument, which includes a built-in simple sampling system.
