The T-connector is an IP65 classified pre-wired connector where two or more electro-mechanical switches, VS4128, are serially connected to provide one common output.
A decentralised vacuum system with several vacuum switches and output signals can be ‘reduced’ to just one input signal for the PLC or bus I/O. With the T-connector it is also very simple to convert from a centralised to a decentralised vacuum system, since the existing software for a centralised vacuum pump system with maybe one or two vacuum feedback signals does not need to be changed.
Applications for the T-connector can be found in many industries with a high degree of automation, and where there is a need for vacuum sensing on each suction cup for maximum safety and elimination of scrapped parts. Examples are the aircraft, automotive, furniture, whitegoods and glass industries.
The T-connector is quickly installed with standard male-to-female M12 eurofast cable assemblies and requires no settings.
Phone: 03 9761 7731
Festo VTEP proportional valve terminal
The VTEP proportional valve terminal uses high-precision piezo valves to reduce compressed air...
Kaeser CSG.1 oil-free rotary screw compressors
The CSG.1 rotary screw compressors have air flow rates ranging from 4 to 15 m³/min and...
ELGi Air~Alert compressor monitoring solution
Air~Alert is a data transmission and analysis service that monitors critical parameters and sends...