Dwyer Instruments Series TDFS thermal flow switch

Friday, 02 December, 2011 | Supplied by: Dwyer Instruments (Aust) Pty Ltd


The Series TDFS thermal flow switch indicates whether the flow rate is above or below a user set flow rate with NO and NC NPN outputs.

Setpoint is easily field set, just tap the included magnet on the setpoint target three times at the desired flow rate and it’s done. Incorporated into the unit are two LED status indicators on opposite sides of the unit providing visual switch indication - green when the flow is above setpoint, red when the flow is below setpoint.

The TDFS uses an impulse thermal dispersion measurement technique to measure the flow rate where the probe is heated above the process temperature and then is allowed to cool down to the process temperature. Empty pipe is not a problem with the TDFS unlike some competitor units that may overheat. Thermal flow switches can offer better long-term reliability and life expectancy than mechanical flow switches.

Benefits of the TDFS over mechanical flow switches include: no paddles or vanes to break off into the flow; no jams or material stopping the paddle movement; no seals on movement assembly to wear or leak; low pressure drop, only needs to be 10% into the flow (eg, 1/8 for 3/4 schedule 40 pipe).

Online: www.dwyer-inst.com.au
Phone: 02 4272 2055
Related Products

Keller 21D and 21DC series pressure sensors with RFID

The Keller 21D/DC RFID series combine industrial pressure sensing with RFID wireless...

Krohne OPTIMASS 1400 and OPTIMASS 2400 Coriolis flowmeters with EGM

The OPTIMASS 1400 and OPTIMASS 2400 Coriolis flowmeters include an MFC 400 signal converter,...

ifm efector SV type vortex flowmeters

The SV type vortex flowmeters are suitable for use in cooling water circuits and can be used for...

  • All content Copyright © 2015 Westwick-Farrow Pty Ltd