Incremental encoder tester

Thursday, 30 July, 2009 | Supplied by: Plant Control & Automation



PCA have released an updated version of their incremental encoder tester that provides a facility to fully test any encoder that has square wave output signals.

Additional features provided in the latest version are for testing encoders with HTL input power supply but with a fixed 5 V output signal, and the input power to the instrument can now be any voltage from 90-250 VAC.

This tester provides the user with all the tools in one control box to fully test any square wave signal. The user can read each output signal, measure the supply current and phase rotation, and test the encoder on 5, 12 or 24 V supplies. The encoder is connected using either the spring-loaded terminal posts for individual wires, or an adapter lead through a 9-pin D-type plug. For the advanced user there is an additional 9-pin D-type plug for connection to an oscilloscope.

Online: www.pca-aus.com.au
Phone: 02 9482 3733
Related Products

Rittal hygienic air/water heat exchangers

Rittal has revamped its air/water enclosure heat exchangers and now offers two variants of...

Leuze electronic QT70 modular tower lights

The QT70 series tower light is 70 mm in diameter and allows for customisation to specific needs...

Fluke Ti450 SF6 gas leak detector

The Ti450 SF6 gas leak detector combines a high-quality infrared camera with an SF6...


  • All content Copyright © 2017 Westwick-Farrow Pty Ltd